USB-C Doppelsteckdose QC 811766
1000W Inverter m. Vorrang 82262
2000W Inverter m. Vorrang 82263
3000W Inverter m. Vorrang 82264
500W Inverter m. Vorrang 82261
LED Prof.Alu fl.1,5m schw 829993
Alu LED Eckprof.Set schwa 829994
MPPT Control Display 801256
Batteriewächter1000A/50mV 801254
Batteriewächter2000A/50mV 801255
Batteriewächter 500A/50mV 801253
Delta Pro Control Panel 813313
Electrical systems for campers and batteries
The on-board battery is the central point of the electrical system
The on-board battery, also the second battery , is the center of vehicle electrics in the motorhome or camper. Are common for AGM batteries, but also gel batteries or high-quality lithium batteries qualify.
Consumers, such as lamps, cool boxes, voltage converters or mobile phone chargers
All consumers are protected by fuses and supplied with 12 volts from the battery. The battery also serves as storage and provides the corresponding power. Battery sizes of around 100 Ah are sufficient for most camper applications. Such a battery would be able to supply a compressor cooler with electricity for about 2 days. With a voltage converter , household devices with 230 volts can be operated via the on- board battery .
How is the battery charged?
There are several ways of recharging the battery with electricity. Charging while driving: The alternator's current also charges the 2nd battery. To do this, an isolating relay must be installed. Charging with 230 volts: if the motorhome is connected to "shore power", it can be charged with a special charger that turns 230V into 12V. Charging with solar: A solar system on the vehicle roof always charges when the sun is shining. This ecological method is often used when camping because it is maintenance-free and efficient. Other charging options: There are other devices that can charge the battery, such as a fuel cell or a power generator .
Installation of the electrical system
We provide you with all the components and parts you need to install an electrical system. However, please note that installations should only be carried out by a specialist. Incorrect installation could lead to a cable fire or even personal injury.